cvvmax's Garage
Integrated LED Tail Light Assembly and Front Wrap Around Turn Signals
for Yamaha VMX1700 "V-Max"

© cvvmax December 2012

Picture
Go back to Add-Ons/Modifications Page

Picture

I remember the first day I picked up my first 2009 and rode it off of the dealer's lot. The first thing I noticed were the "flopping in the wind" OEM turn signals.

That issue was resolved by Evoluzione (Ken) by making some simple plates which brought in the front turn signals towards the center of the bike. The rear sets were not made though and so I set out and made full front and rear sets. Then came the smokey black lens covers, which turned out to be the same as a model year of a YZF-R1, with the exception of removing a small plastic tab on the lens cover.

Then the trend was to totally eliminate the turn signals, have them integrated into the tail light assembly and depending on your taste, come up with a solution for the front turn signals.

So, this add-on and modification came about.

LED Integrated Tail Light Assembly and Front Wrap Around Turn Signals.



Picture
RC38907SMK​ (MFGR: Rumble Concepts) Integrated Tail Light Assembly

The unit is a strong integrated led tail light and ls of high quality, plug & play unit with lens and OEM connectors (tail/brake light).

This product directly replaces the OEM tail light without any modification necessary.

 Visibility "be seen" is excellent and the lens quality is the same as the OEM unit and each unit is manufactured with SUPER BRIGHT leds and are highly visible in daylight as compared to other cheap replicas. Warning: The load resistors for led signal to have to correct flash rate are NOT included (built-in), as the manufacturer, Rumble Concepts claims. No problem, if you install everything that is outlined in this Add-On and Modifications section as the turn signals will flash at the OEM rate. Easy installation with OEM fixation and connectors (tail/brake light), OEM comparable high quality clear lens, Ultra Bright Red LEDs for tail/brake lights, Ultra Bright Yellow LEDs for signal lights.

MSRP: US$142.99



Picture
The WA56-BS is Manufactured by MBW.


Picture
The WA56-BS and 6122-00 are sold by Chrome Glow.


Picture
The 6122-00 is manufactured by Radiantz LED Lighting.


Picture
The RC38907SMK is sold by Rumble Concept.


Picture
The 122-7515 is sold and manufactured by Lockhart Phillips.

Picture
OEM Tail Light and Front/Rear Turn Signals Wiring Diagram;​

Download

Picture
Post-Installation Wiring Diagram for the LED Integrated Tail Light Assembly and Front Turn Signals;​

Download

Picture
WA56-BS (MFGR: MBW) Wrap-Around LED Fork Turn Signal Kit



 Clean up the front of your bike with these sleek new one of a kind billet LED fork wrap-around turn signal kits. Each unit contains 30

high quality super bright amber LEDs that are integrated into a super sleek billet CNC aluminum fork wrap, that provides excellent visibility with its wrap-around coverage.  Features: - Kit contains two Amber LED Wrap-Around fork lights. - Each ring has 30 Super Bright LED arrays with 120° viewing angle - Available in Chrome or Black finish - Choose Clear or Smoked lens - Can be operated in low or high intensity brightness by adding a Running Light Feature - Low Power Requirements - 12V DC. - Lifetime warranty against LED failure Fits: - 56mm fits Yamaha V-Max (needs 4mm shims for the 52mm Forks)

MSRP: US$259.95/Set

Picture
MBW Wrap Around LED Light Installation Guide

Download

Picture
6122-00 (MFGR: Radiantz) Dual Element Circuit
Converts single intensity  LED into a dual intensity. Produces a 1/2 bright running light with a full brightness turn.

Application Chart: Part# 6122-00 is for 30-60 LED Strips
 
Installation: Easy installation. Wiring diagram included with each Dual Element Circuit.

MSRP: US$5.49/Ea


Picture
122-7515 (MFGR: Lockhart Phillips)

LED Flasher Relay



Maintains stock turn signal flash rate with simple installation because of the OEM connector.

MSRP: US$12.95


Picture
Go back to Add-Ons/Modifications Page

© 2013-15 cvvmax. No animals, HDs or Ducatis were harmed in the making of this site.
Proudly powered by Weebly