T-Rex Frame Sliders for Yamaha VMX1700 "V-Max"
(Contributed by VmaxVboost)
© cvvmax December 2012
(Contributed by VmaxVboost)
© cvvmax December 2012
GEN2 T-Rex Frame Sliders NO CUT
• New design features: "No-Rotation" bracket • Color: Black • Material: UHMW-PE (ultra high molecular weight polyethylene) • Slider dimensions: approx. 6"in length and 2" in diameter • NO CUT or plastic fairings modification • Kit includes a pair of frame sliders / plastic body protectors (one LHS and one RHS) |
They are made of UHMW-PE (ultra high molecular weight polyethylene), a tough plastic with good strength, wear resistance and dimensional stability. It is more dimensionally stable than Nylon and used in many industrial ball bearing and friction reducing applications. Compared to Delrin, it is softer but tougher. Delrin is harder but more brittle. It is an ideal material for slider since it can absorb more impact force onto itself and therefore reduce the impact on the frame and engine. The slider pucks can be inexpensively replaced in case of a low side. We use highest grade commercially available 12.9 bolts (177,000 psi in tensile strength). The bracket is machined from solid steel plate and attached to the frame at multiple locations to avoid rotation that can damage the plastic fairings (see more explanation below). Rest assured that you are getting the best material commercially available. The frame sliders you will receive will most likely be the one pictured above. However, due to constant improvement, the frame sliders can sometimes vary slightly from that in the picture.

The T-Rex Frame Sliders are Manufactured and Sold by T-Rex Racing Inc.
© 2013-15 cvvmax. No animals, HDs or Ducatis were harmed in the making of this site.