ULTRAGEL® Motorcycle Seat Gel Pad - Medium TR
for Yamaha VMX1700 "V-Max"
(Contributed by VmaxVboost)
© cvvmax December 2012
for Yamaha VMX1700 "V-Max"
(Contributed by VmaxVboost)
© cvvmax December 2012
ULTRAGEL® Motorcycle Seat Gel Pad- Medium TR
Thickness: 5/8"
Length: 10"
Width Rear: 13"
Width Front: 7"
Includes Smoothing foam and installation notes.
ULTRAGEL® gel pads can be easily trimmed or shaped using sharp-edged cutting tools such as scissors, Xacto knives, box cutters, etc. They can also be easily contoured, cut or shaped with hot-wire or hot-knife cutters and are one of the best cost/performance motorcycle gel pads money can buy.
Benefits;
· All products are manufactured in USA factory, directly from the basic raw materials, using a proprietary
ULTRAGEL® gel formulation.
· They are phthalate, silicone, and latex free and manufactured using only environmentally and personally safe
ingredients and have no obnoxious odors and are hypoallergenic.
· Up to 30 -50% cost savings over similar sized motorcycle gel products (by size means volumetric size including
thickness as well as surface area) from other providers.
Key Features;
· Optimized gel composition/thickness for maximum rider comfort.
· Uniform distribution of heat and body weight.
· Will not leak if punctured.
· Conform efficiently and comfortably to the body.
· Provide slow recovery dynamics after deformation, minimizing skin shear, skin pressure points and
blood-circulation cut-off.
· Reduce transmission of road impacts and bike vibrations minimizing rider-fatigue on long trips.
· Enhance rider comfort, especially during and after long road trips.
In the ULTRAGEL®, the gel has been formulated to give the “SWEET SPOT” best balance of tactile and dynamic properties to maximize rider comfort. Soft enough to easily conform to body contours and to minimize bounce or resilience, yet firm enough to provide maximum comfort, needed support, and stability to the rider. It has been optimized for gel thickness (at 5/8 inch) for stand alone gel pads so you don’t pay for more gel than needed, but which really enhances rider comfort compared to thin 1/4" or 3/8" pads. GEL THICKNESS MATTERS!!! DON’T LET ANYONE CONVINCE YOU OTHERWISE.
Thickness: 5/8"
Length: 10"
Width Rear: 13"
Width Front: 7"
Includes Smoothing foam and installation notes.
ULTRAGEL® gel pads can be easily trimmed or shaped using sharp-edged cutting tools such as scissors, Xacto knives, box cutters, etc. They can also be easily contoured, cut or shaped with hot-wire or hot-knife cutters and are one of the best cost/performance motorcycle gel pads money can buy.
Benefits;
· All products are manufactured in USA factory, directly from the basic raw materials, using a proprietary
ULTRAGEL® gel formulation.
· They are phthalate, silicone, and latex free and manufactured using only environmentally and personally safe
ingredients and have no obnoxious odors and are hypoallergenic.
· Up to 30 -50% cost savings over similar sized motorcycle gel products (by size means volumetric size including
thickness as well as surface area) from other providers.
Key Features;
· Optimized gel composition/thickness for maximum rider comfort.
· Uniform distribution of heat and body weight.
· Will not leak if punctured.
· Conform efficiently and comfortably to the body.
· Provide slow recovery dynamics after deformation, minimizing skin shear, skin pressure points and
blood-circulation cut-off.
· Reduce transmission of road impacts and bike vibrations minimizing rider-fatigue on long trips.
· Enhance rider comfort, especially during and after long road trips.
In the ULTRAGEL®, the gel has been formulated to give the “SWEET SPOT” best balance of tactile and dynamic properties to maximize rider comfort. Soft enough to easily conform to body contours and to minimize bounce or resilience, yet firm enough to provide maximum comfort, needed support, and stability to the rider. It has been optimized for gel thickness (at 5/8 inch) for stand alone gel pads so you don’t pay for more gel than needed, but which really enhances rider comfort compared to thin 1/4" or 3/8" pads. GEL THICKNESS MATTERS!!! DON’T LET ANYONE CONVINCE YOU OTHERWISE.

The ULTRAGEL® Motorcycle Seat Gel Pad- Medium TR is Manufactured by an unknown Manufacturer and sold on EBay by a Seller named (egelpm).
© 2013-15 cvvmax. No animals, HDs or Ducatis were harmed in the making of this site.