CHECKING RELAYS
Check each relay for continuity with the pocket tester. If the continuity reading is incorrect, replace the relay.
Check each relay for continuity with the pocket tester. If the continuity reading is incorrect, replace the relay.
1. Disconnect the relay from the wire harness.
2. Connect the pocket tester (Ohms. x 1) and battery (+12VDC) to the relay terminal as shown.
Check the relay operation.
If out of specification -> Replace.
2. Connect the pocket tester (Ohms. x 1) and battery (+12VDC) to the relay terminal as shown.
Check the relay operation.
If out of specification -> Replace.
Headlight Relay
1. Positive battery terminal
2. Negative battery terminal
3. Positive tester probe
4. Negative tester probe
2. Negative battery terminal
3. Positive tester probe
4. Negative tester probe
© 2013-15 cvvmax. No animals, HDs or Ducatis were harmed in the making of this site.