1. Stator Coil (p/o AC Magneto Assy)
|
CHECKING THE STATOR COIL
1. Disconnect:
• Stator coil coupler (from the wire harness)
2. Check:
• Stator coil resistance
If out of specification -> Replace the crankshaft position sensor/stator assembly.
1. Disconnect:
• Stator coil coupler (from the wire harness)
2. Check:
• Stator coil resistance
If out of specification -> Replace the crankshaft position sensor/stator assembly.
a. Connect the pocket tester (Ohms x 1) to the stator coil coupler as shown.
• Positive tester probe -> Black "1"
• Negative tester probe -> Black "2"
• Positive tester probe -> Black "1"
• Negative tester probe -> Black "3"
• Positive tester probe -> Black "2"
• Negative tester probe -> Black "3"
• Negative tester probe -> Black "2"
• Positive tester probe -> Black "1"
• Negative tester probe -> Black "3"
• Positive tester probe -> Black "2"
• Negative tester probe -> Black "3"
b. Measure the stator coil resistance.
© 2013-15 cvvmax. No animals, HDs or Ducatis were harmed in the making of this site.