cvvmax's Garage

Picture
Picture
Picture
Picture
Picture

Sensor Operation Codes

The diagnostic sensor operation code numbers cannot be displayed on the Multi-Function Meter. To display the diagnostic
sensor operation code numbers, use the Yamaha Diagnostic Tool.
Picture
To view the Diagnostic Sensor Operation Code Display and Procedures, click on the Button to the right.          


Diagnostic Code No.
01
Item
Throttle Position Sensor Signal
Details
Check values with throttle valves fully open and closed.
Related Fault Code Nos.
Picture

02
Atmospheric Pressure
Compare the actually measured atmospheric pressure with the display value.

03
Intake Air Pressure
Displays the intake air pressure.
Picture
Picture

05
Air Temperature
Compare the actually measured air temperature with the display value.
Picture

07
Vehicle Speed Pulses
Check that the number increases when the rear wheel is rotated.
Picture

08
Lean Angle Sensor
Check value for upright and overturned conditions.
Picture
Picture

09
Fuel System/Battery Voltage
Compare the actually measured battery voltage with the meter display value.
Picture

11
Engine Temperature
Compare the actually measured engine temperature with the display value.
Picture

20
Sidestand Switch
Check value for retracted and extended conditions.
Picture

21
Neutral and Clutch Switches
Check state of Neutral and Clutch Switches.
Picture
Picture

60
EEPROM Fault Code Display
Current Faults (Codes 00, 01 and 02) are displayed, if present.
Picture

61
EEPROM Fault Code Display
Current Faults (All Codes 12 through 70) are displayed, if present.

62
Malfunction History Code Erasure
Displays total number of faults since last fault code Erasure.

63
Malfunction Code Reinstatement
Fault Code Reinstatement - (For Fault Code 24 ONLY).

70
Control Number
Displays Control Number (0 - 254). For internal use ONLY.

Actuator Operation Codes

The diagnostic actuator operation code numbers cannot be displayed or actuated on the Multi-Function Meter. To display or actuate the diagnostic actuator operation code numbers, use the Yamaha diagnostic tool.
Picture
To view the Diagnostic Actuator Operation Code Display, Actuation and Procedures, click on the Button to the right. 


Diagnostic Code No.
30
Item

Front Cylinder Ignition Coil
Details

Actuates the front cylinder ignition coil five times at one-second intervals.
Related Fault Code Nos.
 
Picture

31
Rear Cylinder Ignition Coil
Actuates the rear cylinder ignition coil five times at one-second intervals.
Picture

36
Front Cylinder Injector
Actuates the front cylinder injector five times at one-second intervals.
Picture

37
Rear Cylinder Injector
Actuates the rear cylinder injector five times at one-second intervals.
Picture

50
Relay Unit
Actuates the relay unit five times at one-second intervals.
Picture

52
Headlight Unit
Actuates the headlight unit five times at five-second intervals.

54
ISC Valve
Checks ISC Valve by fully closing and opening the valve.
Picture
Picture

Picture
Picture
Picture
Picture
Picture

© 2013-15 cvvmax. No animals, HDs or Ducatis were harmed in the making of this site.
Proudly powered by Weebly